Easy Print Super Strong Hook - Single Piece - No Screws - No Supports - HSW Hone
Think outside the… hexagon. Designed for 3D optimal layer direction, single piece, works like a peg-board hook.
Order this print
Tune the print, pick a maker, and check out — all here.
Sign in and add a shipping address to see each maker's delivered price.
Sign in to order- ⬢made-with-layersMakerFreedom 1.00ABS | Gray4 days$19.50
- ⬢teaching-techMakerFreedom 1.00ASA | White3 days$40.50
Notes from the designer
Easy Print Super Strong Hook - Single Piece - No Screws - No Supports - HSW Honeycomb Storage Wall
Update 17/09/2023Added “HSW Ez-V1 Round Object Holder - 65mm Left”Update 29/04/2023Added “Ez-V1” and “Ez-V2" hooks (14 files) which supersedes all other versions. These have been completely remodeled for improved strength, easier bed adhesion for ABS/ASA, more secure fit with easier clipping, less side-to-side movement when installed and a cleaner look.Added 2 base clips for remixing.Update 24/04/2023HSW Simple Hook 50mm Type 1 v1.1 added - stronger vertical section3 “Ez” hooks added for easier install - these work better for PLA wall pieces, and the firm ones work better for PETG wall pieces.---I wasn't happy with the current hook designs as the layer direction was always sub-optimal, seemed wasteful and they do not hook on securely. Here are some easy print strong designs. No screws or supports needed and no need to print separate pieces to be able to mount them.You will need good first layer adhesion - clean your build plate and get your first layer squish right or use a brim if you are using a warp-y material.Print setting recommendations:Material: PLA, PETG, ABS, ASA (PETG…
Demo listing for layout testing. Original design by KYZ Design on Printables, licensed Creative Commons — Attribution — Noncommercial.