One For All | Cable Strap | Print In Place Clamp | Belt
One to rule them all! A simple way to tie your big cables, your small cables or many other things together!
Order this print
Tune the print, pick a maker, and check out — all here.
Sign in and add a shipping address to see each maker's delivered price.
Sign in to order- ⬢makers-museMakerFreedom 1.00ABS | Translucent3 days$19.50
- ⬢made-with-layersMakerFreedom 1.00ABS | Gray7 days$23.50
Notes from the designer
One For All | Cable Strap | Print In Place Clamp | Belt
A cable strap to keep all sorts of cables from turning into a big knot. My goal was to find a solution that could handle all sizes of cables. For small charging cables there are already many models, but large cables also knot quickly. But you can also use it for much more, e.g. tie tension belts together or hold your skis in place. I was surprised myself how sturdy the strap is, I was able to lift 10kg without the strap slipping or opening.The clamp is printed in place, you don't need supports. Choose a length of the strap which is then slid into the opening from the side.Optionally you can print a bracket if you want to attach the cable tie permanently to a cable.Print Instruction:0.2mm layer height2 perimeters10-15% InfillAttention: I've added a new version of the clamp which has larger clearance. The new perimeter generator "Arachne" from Prusaslicer 2.5 has the individual parts otherwise connected.If the new clamp in your case shouldn't have enough clamping effect, download the version with smaller tolerance. Here you have to change the perimeter generator in Prusaslicer to…
Demo listing for layout testing. Original design by Extrutim on Printables, licensed Creative Commons — Attribution — Noncommercial — Share Alike.