Geared Phone stand
Geared Phone stand-holder
Order this print
Tune the print, pick a maker, and check out — all here.
Sign in and add a shipping address to see each maker's delivered price.
Sign in to order- ⬢made-with-layersMakerFreedom 1.00PLA | Black5 days$5.50
- ⬢modbotMakerFreedom 1.00PLA | Gray7 days$8.50
- ⬢lost-in-techMakerFreedom 1.00PLA | White4 days$9.50
- ⬢teaching-techMakerFreedom 1.00PLA+ | White5 days$29.50
Notes from the designer
Geared Phone stand
I really like gears - you can see it on my models, there are many on this topic. I was inspired by similar holders, but I added new things to this one - it can be printed print-in-place, I added a locking wheel so that the gears do not move under load.The Print-in-place version of the model cannot be disassembled.During the first tests, I found that the first one could be disassembled, so I added separate parts if you wanted to have a holder in different colors.26.2. Update !! Added number of cutouts in the locking cylinder for finer adjustment of the holder angle. From 4 to 8 cutouts. If there is a problem with releasing the Aretation part, turn the knob a little sideways or tap on the hexagon. The tolerance between the parts should allow separation without problems. Try downloading the model again, I uploaded looser parts Optional model with fine angle locking added - entire Print-in-place holder, also individual parts - with 12 locking cutouts 24.3. UPDATE !!!Added after comments, the part of the Gear Holder arch that holds the phone has a…
Demo listing for layout testing. Original design by Thorin Oakenshield on Printables, licensed Creative Commons — Attribution — Noncommercial — NoDerivatives.