SD/MicroSD card case
(Yet Another) SD/microSD card case with the rough XY dimensions of a credit card or Raspberry Pi
Order this print
Tune the print, pick a maker, and check out — all here.
Sign in and add a shipping address to see each maker's delivered price.
Sign in to order- ⬢made-with-layersMakerFreedom 1.00PLA | White2 days$8.50
- ⬢modbotMakerFreedom 1.00ABS | Gray6 days$20.50
- ⬢uncle-jessyMakerFreedom 1.00PLA+ | Black6 days$28.50
- ⬢lost-in-techMakerFreedom 1.00PLA+ | White2 days$30.50
Notes from the designer
SD/MicroSD card case
(Yet Another) SD/microSD card case with the rough XY dimensions of a credit card or Raspberry Pi Print instructionsAdded a tray with 1 SD and 7 microSD slots. It's not as well-tested as the 2SD/5uSD tray; the uSD slots might be tighter. Threw in a new photo with a storage idea. :D Printer Brand: Original Prusa Printer: i3 MK3S Rafts: Shouldn't be necessary unless your print surface is particularly uneven Supports: No Resolution: 0.1 mm (0.15 mm should work, I actually don't remember the exact setting I used) Infill: 15% (The outer cover should print completely solid) Filament: MatterHackers PRO PLA Jet Grey (any good quality PLA should do just fine) The 3MF file is set for 0.1 mm layer height and Generic PLA. It should be ready to slice to gcode, no supports necessary. It should also print well in PETG as long as that filament type is selected. NOTE: As noted in the comments, the snap closure nubs will probably last longer in PETG. SCAD files are also available if you want to modify them in OpenSCAD; apologies in advance for the horrible SCAD code, I'm planning to rewrite it some…
Demo listing for layout testing. Original design by mmurase00 on Printables, licensed Creative Commons — Attribution — Share Alike.