Hook, Wall hook
A collection of wall mounted hooks in a variety of shapes and sizes
Order this print
Tune the print, pick a maker, and check out — all here.
Sign in and add a shipping address to see each maker's delivered price.
Sign in to order- ⬢teaching-techMakerFreedom 1.00PLA | Black2 days$9.50
- ⬢lost-in-techMakerFreedom 1.00PLA+ | Beige3 days$28.50
- ⬢makers-museMakerFreedom 1.00PLA+ | Gray3 days$31.50
Notes from the designer
Hook, Wall hook
Here is a whole set of hooks in different shapes and sizes. There are so many different ways in which a hook can be used and I hope you will find some that are to your liking.Approximate sizes of the different hooks are shown in the table below, all hooks are 8mm (0.3") wide.HooknameXSSMLXLHook9mm (0.4")15mm (0.6")21mm (0.8")27mm (1.1")33mm (1.3")U-hook8mm (0.3")14mm (0.6")20mm (0.8")26mm (1.0")32mm (1.3")Pin10mm (0.4")15mm (0.6")20mm (0.8")25mm (1.0")30mm (1.2")Slant13mm (0.5")18mm (0.7")23mm (0.9")28mm (1.1")33mm (1.3")Flat13mm (0.5")18mm (0.7")23mm (0.9")28mm (1.1")33mm (1.3")Stright25mm (1")35mm (1.4")45mm (1.8")55mm (2.2")65mm (2.6")Rhino 19mm (0.7")26mm (1") Installation The hooks is screwed to the wall, so it has a strong and secure fixing. Use a flat head screw that fits countersunk holes with a diameter of 3-3.5 mm and a length of 16-20 mm, but this may vary depending on the type of wall you have.Printing and print settingsPrint the hooks lying on their sides for best results. In the model files, the parts are orientated in the direction best…
Demo listing for layout testing. Original design by ORM on Printables, licensed Creative Commons — Attribution — Noncommercial.