Modern Gridfinity Case
A clean and modern design case for Zack Freedman's Gridfinity system.
Order this print
Tune the print, pick a maker, and check out — all here.
Sign in and add a shipping address to see each maker's delivered price.
Sign in to order- ⬢makers-museMakerFreedom 1.00PETG | Translucent5 days$18.50
- ⬢teaching-techMakerFreedom 1.00ABS | Black6 days$24.50
Notes from the designer
Modern Gridfinity Case
This is my design for a case for holding Gridfinity bins. My design goals included:Clean designNo HardwareAble to stand on ends and backContents stay in placeEasy to open and securely closeStackableDesigned for 3D printingWhile I appreciate the most excellent rugged boxes by Yanev and Whity (I've printed a few!) I wanted something that was tailored to gridfinity, and that leaned into what we can do with 3D printing without injection molding design language.AccessoriesThe small bins in the pictures can be found here: Gridfinity Deep 1x1 BinsAndreas Mass designed a divider add-on to keep parts from mixing in divided bins.Louis set up a configurable label maker for 3D printed labels.There's an excellent online bin generator: https://gridfinity.perplexinglabs.com/Importantprint the calibration part first. It will save you a lot of effort later!The case was designed for 0.2mm layers and 0.4mm nozzle. A 0.6mm nozzle may work, but with Input Shaper the time savings are minimal. Layer heights other than 0.2mm may cause problems with fit as the design assumes…
Demo listing for layout testing. Original design by Matthew on Printables, licensed Creative Commons — Attribution.