Modern spiral planter
Planter with a spiral pattern and drain holes at the bottom (with additional plate for access water )
Order this print
Tune the print, pick a maker, and check out — all here.
Sign in and add a shipping address to see each maker's delivered price.
Sign in to order- ⬢makers-museMakerFreedom 1.00PLA | Black5 days$6.50
- ⬢teaching-techMakerFreedom 1.00ABS | Beige6 days$19.50
- ⬢made-with-layersMakerFreedom 1.00ABS | Black3 days$24.50
- ⬢modbotMakerFreedom 1.00PLA+ | White5 days$32.50
Notes from the designer
Modern spiral planter
If you create BambuSlicer profiles feel free to add them here: https://makerworld.com/en/models/221532 The Planter is designed to be printed with a 0.4 nozzle (and the same line width). That way the blades of the spiral will always be four lines wide and the printer can follow a continuous path (for this to work choose a wall thickness of at least two wall lines). By default the flower pot has a height of 80mm and a maximum (outer) diameter of around 85.5mm. As seen in photos I also printed a small (~65mm high) and big (~95mm high) version, by just scaling the planter in the slicer.There is a version with a closed bottom and one with drainage holes in the bottom for the excess water to escape. If you want to, you can print the small plate that I provided to catch any water flowing out of there. If you like the design, I would be flattered to receive a little tip via PayPal: https://www.paypal.com/paypalme/geldanmaxPlease note, that it is not designed to be printed in vase mode. If you want to, you can still try it, but it may not be watertight. Since I am…
Demo listing for layout testing. Original design by SchulteGeileTechnik on Printables, licensed Creative Commons — Attribution — Noncommercial.